Question 1

What is a perforated metal facade?

Accepted Answer

A perforated metal facade is an architectural cladding system featuring metal panels (typically aluminum or steel) with patterns of holes or slots. These provide sun shading, privacy screening, and aesthetic appeal while allowing natural ventilation and daylight transmission. Open area typically ranges from 20-60% depending on application.

Question 2

What thickness aluminum is used for facade screens in UAE?

Accepted Answer

For UAE facade applications, we use 2-4mm aluminum for decorative screens and 3-6mm for structural panels. Thickness selection depends on panel size (larger panels need thicker material), wind load requirements (high-rise projects need more robust panels), and perforation open area percentage.

Question 3

What wind load is considered for Dubai facade systems?

Accepted Answer

Dubai facade systems are designed for wind pressures of 1.5-2.5 kN/m² depending on building height and location. High-rise projects (above 75m) may require 3.0+ kN/m² for upper floors. All our facade systems include structural calculations signed by licensed engineers.

Question 4

How do you ensure fire compliance for metal facades?

Accepted Answer

All facade materials are tested to ASTM E84 or EN 13501-1 standards. For buildings over 15m in UAE, we use only Class A (non-combustible) materials. We provide complete fire test documentation and coordinate directly with UAE Civil Defence for project approvals.

Question 5

How to prevent oil canning in aluminum facade panels?

Accepted Answer

We minimize oil canning through: proper panel stiffening with returns and ribs, appropriate material thickness for panel size, concealed fixing systems that allow thermal movement, and break-formed profiles instead of flat sheets where possible.

Question 6

What is the typical lead time for facade panels?

Accepted Answer

Standard facade panel production takes 6-8 weeks from approved shop drawings. Complex parametric designs may require 10-12 weeks. Rush orders can be accommodated for smaller quantities. Lead time includes engineering, material procurement, fabrication, and finishing.

Architectural Metal Facades

WHAT WE DELIVER

Scope of Work

Outside Our Scope

Materials

Technical Detailing

Need This Capability?

EXPLORE OUR FINISHES LIBRARY

Painted Finishes

PVD Coatings

Powder Coating

Anodizing

Electroplating

Patina & Chemical

Mechanical Finishes

Specialty Coatings

Pantone Colors

Jotun Coatings

READY TO BEGIN?

Upload Drawings

Request Sample

Book Design Assist

Facade Systems FAQ

OTHER CAPABILITIES

Special Metal Finishes

Interior Metal Decor

Joinery & Hybrid Works

Etching & Electroplating

VISIT OUR EXPERIENCE CENTRE

EXPERIENCE CENTRE

START YOUR PROJECT

WHO WE COLLABORATE WITH